What fascias, soffits and gutters do
They work as one system. If one fails, the others usually follow: a rotten fascia lets the gutter sag, the gutter overflows, and the water runs down the wall.
- Fascia: the board along the bottom edge of the roof. It carries the gutter and supports the bottom row of tiles.
- Soffit: the board underneath, closing the gap between the fascia and the wall. It's often where the loft gets its ventilation.
- Gutters and downpipes: carry rainwater from the roof to the drain, away from the walls.
Signs it's time to replace them
- Peeling paint, soft or split timber, or gaps where boards have shrunk
- Gutters that drip at the joints, overflow in rain or sag between brackets
- Green streaks or damp patches on the brickwork below the gutter
- Birds or wasps getting in under the eaves
- Soffits that have dropped, cracked or come away
Full replacement in uPVC
uPVC comes in white, black, anthracite grey and wood-effect. Some firms offer 'capping over', a thin uPVC skin fitted over the old timber. It's cheaper, but it hides rot instead of fixing it, so ask which you're being quoted for.
- Scaffold or a tower goes up, and the old gutters come down.
- Old fascias and soffits are removed. Before work starts, older soffits are checked for asbestos board and the eaves are checked for nesting birds or bats.
- The rafter ends are checked and repaired if they've rotted.
- New uPVC fascia and soffit go on, with ventilation if the loft needs it, and an eaves protection tray so the bottom of the roof felt can't rot.
- New gutters and downpipes are fitted to the right fall, and joints are sealed.
Gutters and the damp-wall link on terraces
Most Victorian and Edwardian terraces in Liverpool and Bootle have solid brick walls with no cavity. When a gutter leaks or overflows onto the same spot every time it rains, the brick soaks through and the damp shows inside: a patch high on a bedroom wall, peeling paper under the window, or mould in a corner. It's often blamed on rising damp or condensation when the cause is a gutter joint.
Check in heavy rain. If water is spilling over the gutter or dripping from a joint above the damp patch, fix the gutter first and let the wall dry out before spending money on damp treatments.
On terraces, gutters often run across several houses. A blocked section next door can overflow onto your wall, so it's worth a word with your neighbour.
Concrete Finlock gutters
Many post-war council-built houses across Merseyside have concrete gutters (often called Finlock) built into the top of the wall instead of plastic gutters on a fascia. As they age, the joints between sections open up and water soaks straight into the wall below, which is a common cause of damp on upstairs walls. They can be relined, or removed and replaced with a timber or uPVC fascia and plastic gutters. Replacement typically costs £2,300–£4,500.
Roof ventilation
Many lofts are ventilated through the soffits. When roofline is replaced, or after a loft has been insulated up to the eaves, those vents can end up blocked, and condensation follows: damp timbers, mould and drips that look like a leak. BS 5250 covers how a roof space should be ventilated. New soffits can include continuous vents, and insulation should stop short of the eaves or be fitted with eaves ventilators so air can still flow.
Roofline prices
These are typical Merseyside prices; your quote is fixed after a survey. The price depends on the length of roofline, the access, whether the soffits are deep, and the colour (anything other than white costs more). If you're having a new roof, do the roofline at the same time and the scaffold is shared.
| Job | Typical Merseyside price |
|---|---|
| Full roofline, terraced house | £1,000–£2,000 |
| Full roofline, semi-detached | £1,500–£3,000 |
| Full roofline, bungalow | £1,300–£2,800 |
| Full roofline, detached | £2,500–£4,500 |
| Fascia and soffit, per metre | £90–£170 per metre |
| New gutters and downpipes only | £450–£800 |
| Concrete (Finlock) gutters replaced | £2,300–£4,500 |
Questions people ask
What is the difference between fascias and soffits?
The fascia is the upright board along the roof edge that holds the gutter. The soffit is the flat board underneath that closes the gap to the wall.
Do roofers do fascias and soffits?
Yes. Roofline is usually done by roofers because it ties into the bottom of the roof, the felt and the gutters.
How long do uPVC soffits and fascias last?
uPVC doesn't rot and needs no painting, and good-quality boards are expected to last for decades. Check the manufacturer's guarantee on the product you're offered.
How long do timber fascias last?
Painted timber lasts well if it's repainted every few years. Left alone, it rots at the joints and ends, often within ten to fifteen years of the last paint.
Do you replace fascias when replacing gutters?
Not if the fascias are sound; new gutters and downpipes alone typically cost £450–£800. If the boards are soft or rotten, replace them together; new gutters won't stay straight on rotten boards.
Can you replace a soffit without removing the fascia?
Sometimes, but it's usually easier to do both at once, because the soffit sits behind and under the fascia.
How long does it take to replace soffits and fascias?
A typical semi takes two to three days, plus putting up and taking down the scaffold.
Should I replace fascias and soffits when I get a new roof?
If they're timber or past their best, yes. The scaffold is already up, and the eaves and felt detail can be done properly in one go.
Do new fascias add value?
Not directly, but a buyer's surveyor will flag rotten fascias and leaking gutters, and a tidy roofline helps a house look looked-after.
Who do I contact to remove wires off my fascia?
Phone and broadband cables belong to your provider or Openreach; ask them to unclip and refit them. Never touch a power cable; in Merseyside that's SP Energy Networks.
Get a free, fixed quote
Tell us what's wrong. A photo helps. We'll call you back with a fixed price.
